Belt Conveyor Components

  • Plough Tripper
    Plough Tripper

    The Plough Tripper is installed at an intermediate section of a belt conveyor to discharge material from the belt into a side chute. A plough blade lowers from above and moves against the belt...

    Read More
  • Belt Alignment System
    Belt Alignment System

    Belt drift is a common operating problem on long belt conveyors. As the belt moves off center, material can spill from the sides, and severe drift can damage the belt. The Belt Alignment System...

    Read More
  • Passive Hydraulic Belt Tracker
    Passive Hydraulic Belt Tracker

    The Passive Hydraulic Belt Tracker uses the moving belt as its mechanical power source and does not require an external power supply. When the belt drifts and contacts the drive wheel, belt...

    Read More
  • Travelling Tripper Conveyor
    Travelling Tripper Conveyor

    The Travelling Tripper Conveyor is a rail-mounted discharge unit that travels back and forth along the conveyor frame. As it moves, it discharges material at different points along the belt,...

    Read More
  • Belt Trackers Conveyor
    Belt Trackers Conveyor

    The Belt Trackers Conveyor uses the belt's own drift force to adjust the idler position and guide the belt back toward the center. It requires no power unit, hydraulic cylinder, or sensor. When...

    Read More
  • Hydraulic Take Up Belt Conveyor
    Hydraulic Take Up Belt Conveyor

    The Hydraulic Take Up Belt Conveyor maintains belt tension as the operating load changes. Insufficient tension can cause belt slip, while excessive tension increases the load on the belt and...

    Read More
  • Reciprocating Plate Feeder
    Reciprocating Plate Feeder

    The Reciprocating Plate Feeder is installed at the bottom of a silo or hopper. Material falls onto the feeder plate, which moves back and forth to push the material toward the downstream conveyor...

    Read More
  • Truck Loading Gate
    Truck Loading Gate

    The Truck Loading Gate is installed at the discharge point of a truck or rail car loading tower. The vehicle stops below the gate, and the gate opens to discharge material directly into the truck...

    Read More
  • Concrete Slurry Separator
    Concrete Slurry Separator

    The Concrete Slurry Separator is suitable for building slurry, shield slurry, and mine tailings. It separates stone and sand from the slurry, allowing the water to be reused. The solid material is...

    Read More
As one of the most professional belt conveyor components manufacturers and suppliers in China, we're featured by quality products and good service. Please rest assured to buy customized belt conveyor components made in China here from our factory. Also, pricelist is available.

Home

Phone

E-mail

Inquiry