Slide Gate
-
3 Way Gravity Diverter Valve
The 3 Way Gravity Diverter Valve is installed at the discharge point of a conveyor belt. Material enters through the top inlet, and an internal flap directs the flow to either the left or right...
Read More -
4 Way Gravity Diverter Valve
The 4 Way Gravity Diverter Valve has one more outlet than the three-way type. Material enters through the top inlet and can be directed to four outlets at the bottom. Two independent flaps control...
Read More -
Louver Valve
The Louver Valve is used in air ducts and flue gas pipelines to regulate the flow area by rotating multiple parallel blades. The blade angle controls the air or flue gas flow through the duct....
Read More -
Sector Gate
The Sector Gate is installed at the discharge point at the bottom of a silo. Its gate plate has a sector-shaped profile and rotates around a hinge pin to open or close the material outlet. A...
Read More -
Silo Slide Gate
The Silo Slide Gate uses a flat gate plate that moves horizontally from the side to open or close the material outlet. When the gate is closed, the plate cuts off the material flow. When fully...
Read More -
Ash Discharge Valve
The Ash Discharge Valve is used at the discharge point of dust collectors to remove collected ash while limiting outside air entering the system. The rotary airlock type uses a rotor with multiple...
Read More -
Double Flap Airlock Valve
The Double Flap Airlock Valve uses two independently operated flaps to discharge material while limiting air infiltration into the system. The leakage rate is controlled below 0.5%, and the valve...
Read More













