Electric Actuators
-
Electric Linear Actuator with Position Feedback
Conventional electric actuators often use limit switches to confirm the fully retracted and fully extended positions. When an application requires intermediate positioning or control of a valve or...
Read More -
Waterproof Electric Linear Actuator
Many clients install electric actuators outdoors or on machines that are washed frequently. After a few months, the actuator may seize because water has entered through gaps around the rod and end...
Read More -
Electric Telescopic Actuator
The Electric Telescopic Actuator uses a direct electric motor drive instead of a hydraulic system. The motor rotates a screw, which drives the nut in a linear direction. There is no hydraulic...
Read More -
High Speed Electric Linear Actuator
The High Speed Electric Linear Actuator is designed for applications where linear speed is more important than maximum thrust. The thrust range is 300 N to 4000 N, while the no-load speed reaches...
Read More -
High Force Electric Linear Actuator
The High Force Electric Linear Actuator is designed for applications that require high linear thrust in a compact electric drive. Rated thrust ranges from 10,000 N to 50,000 N, equivalent to...
Read More -
Industrial Electric Linear Actuator
Dust, temperature changes, and vibration can place additional demands on electric actuators used in factory environments. Dust and contaminants can enter through exposed moving areas, while...
Read More -
Telescoping Electric Actuator
The Telescoping Electric Actuator is designed for applications where the available installation length is shorter than the required stroke. Instead of using a single long actuator body, it uses...
Read More -
High Frequency Linear Actuator
Some machines require an actuator to move back and forth continuously throughout the working day. The operating frequency may reach 10 cycles per minute or higher, placing greater demands on the...
Read More -
Micro Electric Linear Actuator
The Micro Electric Linear Actuator is the compact model in our electric actuator range. Unit weight starts at 0.3 kg, with rated thrust from 50 to 1000 N. Stroke options range from 10 to 300 mm,...
Read More -
Compact Electric Linear Actuator
The Compact Electric Linear Actuator is designed for applications where installation length is limited. A standard DT actuator typically has a relatively long retracted length because the motor...
Read More -
Linear Electric Actuator with Control
The Linear Electric Actuator with Control has one key feature: a driver board is built directly into the actuator. A conventional actuator usually needs an external contactor or relay to control...
Read More















