Parallel Electro-hydraulic Actuator
video

Parallel Electro-hydraulic Actuator

Many customers face the same challenge: the space beneath a conveyor belt is too limited for a conventional straight actuator. The Parallel Electro-hydraulic Actuator addresses this issue by relocating the motor from the rear of the cylinder to its side. With the motor and cylinder arranged side by side, the unit significantly reduces overall installation height. Although the width increases by 80 mm to 150 mm, the lower center of gravity provides greater stability in side-mounted installations.
Send Inquiry
Product Introduction

A Compact Solution for Low-Clearance Spaces

 

Many customers face the same challenge: the space beneath a conveyor belt is too limited for a conventional straight actuator. The Parallel Electro-hydraulic Actuator addresses this issue by relocating the motor from the rear of the cylinder to its side. With the motor and cylinder arranged side by side, the unit significantly reduces overall installation height. Although the width increases by 80 mm to 150 mm, the lower center of gravity provides greater stability in side-mounted installations.


Available with thrust ratings from 4.5 kN to 70 kN and strokes from 5 mm to 1,500 mm, this configuration suits a wide range of conveyor lines and platform equipment. The side-mounted motor also allows better airflow around the unit, helping dissipate heat more efficiently. The standard duty cycle reaches 40%, allowing 4 minutes of operation in every 10-minute period. This provides 15% more operating time than the 25% duty cycle of a straight actuator with the same thrust rating.


All oil pipes are housed inside the unit, eliminating exposed flexible hoses and reducing the risk of hose damage and oil leakage. The actuator supports side loads of up to 8% of its rated thrust, making it suitable for applications such as flip plates and swing arms with light offset loads. The product complies with JB/T 12705-2016.

product-800-800
 

Complete Traceability from Steel to Shipment

 

 

Our factory has established a comprehensive traceability system for every Parallel Electro-hydraulic Actuator. Each steel plate is assigned a heat number upon arrival at the plant. At every production stage, including cutting, bending, welding, and machining, workers sign the corresponding process card to maintain a clear production record.


After assembly, each unit undergoes testing on a dedicated test bench. We record no-load current, full-load pressure, operating time, external and internal leakage, and noise levels. All test data is stored in our system for 10 years. By providing the serial number on the nameplate, customers can retrieve the complete production and inspection history, from raw material intake to final shipment.


If a spare part is needed or a fault occurs, these records help us identify the original assembly clearances and seal batch for the specific unit. Our traceability process supports the requirements of Clause 8.5.2 of ISO 9001:2015.

product-800-800

 

Installation Conditions and Application Limits

 

 

The Parallel Electro-hydraulic Actuator is suitable for horizontal installation or applications with a slight tilt. For applications requiring a large upward lifting angle, a straight actuator is generally more suitable. Please provide site photos and installation dimensions so our engineering team can prepare a preliminary matching proposal within one hour.

 

Specifications

 

Parameter

Specification

Motor and cylinder layout

Parallel side-mounted configuration with reduced installation height

Standard thrust

4.5 kN to 70 kN

Standard stroke

5 mm to 1,500 mm

Width increase

80 mm to 150 mm

Side load capacity

Up to 8% of rated thrust

Duty cycle

40% (4 minutes of operation per 10-minute period)

Oil pipe structure

Fully integrated internal piping, with no exposed flexible hoses

Product standard

JB/T 12705-2016

Quality management system

ISO 9001:2015; full production traceability

Typical model

DYTP450-300/70

Model specifications

Thrust: 4.5 kN; stroke: 300 mm; speed: 70 mm/s; motor power: 0.75 kW

 

FAQ

 

 

Q: Can this unit be used for applications requiring a large upward lifting angle?

A: It is not recommended for large upward lifting angles. A straight actuator is a more suitable option for these applications. The parallel configuration is best suited for horizontal installation or applications with a slight tilt.

Q: How can I obtain the complete production and inspection records for my unit?

A: Simply provide the serial number on the nameplate. We can retrieve and provide the available traceability records, covering the steel batch, production process, and final test data.

 

Hot Tags: parallel electro-hydraulic actuator, China parallel electro-hydraulic actuator manufacturers, suppliers, factory, Compact Electro Hydraulic Actuator, electro hydraulic actuators, Electro Hydraulic Linear Actuator, Integrated Vertical Electro hydraulic Actuator, Split type Electro hydraulic Actuator, Ultra large Electro hydraulic Actuator

Send Inquiry

Home

Phone

E-mail

Inquiry