Integrated Vertical Electro-hydraulic Actuator
video

Integrated Vertical Electro-hydraulic Actuator

The Integrated Vertical Electro-hydraulic Actuator addresses a common challenge in industrial equipment: limited installation space. Conventional actuators often have a side-mounted motor that protrudes from the main body and requires additional clearance. Our design places the motor and oil cylinder along the same axis, forming a compact, in-line unit. With no side-mounted motor, external oil tank, or connecting hydraulic pipes, all components are housed within the actuator body.
Send Inquiry
Product Introduction

A Smart Choice For Tight Spaces

 

The Integrated Vertical Electro-hydraulic Actuator addresses a common challenge in industrial equipment: limited installation space. Conventional actuators often have a side-mounted motor that protrudes from the main body and requires additional clearance. Our design places the motor and oil cylinder along the same axis, forming a compact, in-line unit. With no side-mounted motor, external oil tank, or connecting hydraulic pipes, all components are housed within the actuator body.

 

Compared with conventional parallel-type designs, this configuration reduces the overall length by 15%. Its compact structure makes it suitable for narrow channels and confined spaces. It is also ideal for upgrading existing machinery without relocating the equipment frame. The thrust range covers 10 kN to 100 kN, with standard strokes from 50 mm to 2,000 mm and custom strokes up to 4,000 mm. The built-in tank holds 3 L to 18 L of oil. The product complies with JB/T 12705-2016.

506921270hbb2cf70df1bf9b8061631a
 

Built Strong For Real Work

 

 

Our factory operates a dedicated assembly line for this in-line design. Every motor shaft and piston rod undergoes laser alignment to ensure precise positioning. This helps minimize lateral forces during piston rod movement, reducing uneven wear on the rod and seals.

 

The Integrated Vertical Electro-hydraulic Actuator delivers full rated thrust when mounted horizontally or at a downward angle. For upward installation, the angle should not exceed 45 degrees. Beyond this limit, the thrust decreases by 15%. Our engineering team can verify the actual output thrust based on your installation conditions during model selection.

 

The standard model operates at a 25% duty cycle, equivalent to 2.5 minutes of operation followed by 7.5 minutes of rest in each 10-minute period. For applications requiring continuous 24-hour operation, we can add an external fan-cooling or water-cooling system to support continuous-duty operation.

e2ee5fa9cs199d9b8b7c425f05efdfaf 2

 

Where It Works Best

 

 

This actuator is used in a range of heavy industrial applications. Steel plants use it to operate discharge gates, coal mines use it in material-diversion systems, and power plants use it for ash silo valves. Major companies, including Huaneng Group and Shanxi Coking Coal Group, have purchased this product for more than five years.

 

According to our 2025 customer survey, units used by customers for 36 months achieved a mean time between failures (MTBF) of 28,000 hours. Our repair rate is also below the industry average.

 

Each unit uses imported polyurethane oil seals and undergoes a high-pressure holding test before shipment. Internal leakage is limited to 0.5 mL/min, while the specified external leakage rate is zero drops per minute. Every unit is shipped with an individual test report.

 

Specifications

 

Parameter

Standard Spec / Range

Structure

Motor and cylinder arranged on the same axis, with a built-in tank and no external hydraulic pipes

Thrust Range

10 kN–100 kN (customizable)

Stroke Range

50 mm–2,000 mm (custom strokes up to 4,000 mm)

Built-in Tank Volume

3 L–18 L

Mounting Angle

Horizontal or downward installation at 0°–90°: full rated thrust; upward installation: maximum 45°, with a 15% thrust reduction beyond this angle

Standard Duty

25% duty cycle (2.5 minutes of operation followed by 7.5 minutes of rest per 10-minute period)

Continuous-Duty Option

Larger tank with an external fan or water cooler, available for continuous-duty operation

Seal Standard

Imported polyurethane seals; external leakage: 0 drops/min; internal leakage: ≤ 0.5 mL/min

Protection Class

IP44 (standard)

Typical Model

DYTZ1000-500/110 (thrust: 10 kN; stroke: 500 mm; speed: 110 mm/s; motor power: 1.5 kW)

 

OEM And ODM Service

 

We welcome OEM and ODM orders for the Integrated Vertical Electro-hydraulic Actuator. Customization options include nameplates featuring your company logo, special stroke lengths, and alternative operating voltages. Our engineers can review your technical drawings, assess your requirements, and provide a tailored proposal.

modular-1

 

FAQ

 

 

Q: Can I install this unit in an upward-facing position?

A: Yes. The upward mounting angle should be kept within 45 degrees. Beyond this limit, the thrust decreases by 15%.

Q: Do you provide a test report?

A: Yes. Every unit is shipped with its own test report, covering pressure holding, leakage inspection, and operating time.

 

Hot Tags: integrated vertical electro-hydraulic actuator, China integrated vertical electro-hydraulic actuator manufacturers, suppliers, factory, Electro Hydraulic Actuator Aircraft, electro hydraulic actuators, Parallel Electro hydraulic Actuator, Self Contained Electro Hydraulic Actuator, Split type Electro hydraulic Actuator, Ultra large Electro hydraulic Actuator

Send Inquiry

Home

Phone

E-mail

Inquiry