Electro Hydraulic Linear Actuator
video

Electro Hydraulic Linear Actuator

Buyers sometimes confuse the Electro Hydraulic Linear Actuator with a straight vertical actuator because both have a straight cylindrical appearance. However, this product family covers two different hydraulic configurations: a one-piece version with a built-in tank and a split version with a separate hydraulic power unit.
Send Inquiry
Product Introduction

One Series, Two Tank Configurations

 

Buyers sometimes confuse the Electro Hydraulic Linear Actuator with a straight vertical actuator because both have a straight cylindrical appearance. However, this product family covers two different hydraulic configurations: a one-piece version with a built-in tank and a split version with a separate hydraulic power unit.


The thrust range starts at 1 kN for compact models and extends to 200 kN for heavy-duty custom applications. The Electro Hydraulic Linear Actuator uses a coaxial straight-line layout, with the motor aligned with the cylinder instead of projecting from the side. The mounting center distance remains consistent across the series, allowing the same mounting hole arrangement to be used for different thrust models. This reduces the need for additional drilling or welding when changing actuator specifications.


At the same thrust rating, the overall unit length is approximately 15% shorter than a parallel DYTP model. The reduced installation length can leave additional space for service access, walkways, or other machine components.

product-800-800

 

Honed Cylinder Bore for Low Friction

 

 

This product complies with JB/T 12705-2016. The Electro Hydraulic Linear Actuator is available in two tank configurations. The one-piece straight version uses a built-in oil tank with a capacity of 3 L to 18 L and requires no external hydraulic pipes, simplifying installation at the application site.
The split straight version uses a separate hydraulic power unit. The standard oil pipe length is 2 m, with custom lengths available up to 10 m. The pipe pressure rating is at least 16 MPa. The separate tank can provide a larger oil capacity than the integrated configuration, making it suitable for continuous operation or applications with higher ambient temperatures.


Our factory uses a mirror honing process to finish the cylinder bore. The honing head moves repeatedly along the inner surface of the cylinder to achieve a surface roughness of Ra 0.4 μm or better. The resulting smooth bore reduces friction during piston movement and helps limit seal wear.
Under the same operating conditions, a honed cylinder bore can provide a service life up to three times that of a conventionally bored surface before seal replacement, subject to the actual load, speed, hydraulic oil, and operating environment.


Straight-line movement is another feature of the coaxial configuration. Because there is no side-mounted motor creating an offset layout, the piston rod operates along the cylinder axis without additional offset torque. This helps reduce unwanted radial loading on the seals and supports applications requiring accurate linear pushing and pulling, such as gates, dividers, and discharge mechanisms.

 

Specifications

 

Parameter

Specification

Thrust range

Compact: 1 kN to 10 kN / Standard: 10 kN to 100 kN / Heavy-duty: 100 kN to 200 kN

Layout

Coaxial straight-line configuration, no side-mounted motor

Mounting center distance

Consistent across the series; no frame modification required

Length compared with parallel DYTP

Approximately 15% shorter

One-piece tank

Built-in oil tank, 3 L to 18 L; no external hydraulic pipes

Split tank

Separate hydraulic power unit; standard pipe length 2 m, maximum 10 m; pressure rating at least 16 MPa

Cylinder bore roughness

Ra ≤ 0.4 μm; mirror honing

Product standard

JB/T 12705-2016

 

FAQ

 

 

Q: What is the difference between this actuator and the straight vertical type?

A: This product family includes both one-piece and split hydraulic configurations. The straight vertical type refers to a specific actuator configuration within this broader product range.

Q: Can I use the same machine frame for different thrust models?

A: Yes. The mounting center distance remains consistent across the series, so different thrust models can use the same mounting hole arrangement without additional drilling or welding.

 

Hot Tags: electro hydraulic linear actuator, China electro hydraulic linear actuator manufacturers, suppliers, factory, Electro Hydraulic Actuator Aircraft, Electro Hydraulic Linear Actuator, Electro Hydraulic Servo Actuator, Integrated Vertical Electro hydraulic Actuator, Self Contained Electro Hydraulic Actuator, Ultra large Electro hydraulic Actuator

Send Inquiry

Home

Phone

E-mail

Inquiry