Electro Hydraulic Actuator Aircraft
Built for the Sky
The Electro Hydraulic Actuator Aircraft is developed for aircraft hydraulic systems that require high pressure, wide temperature capability, and fire-resistant hydraulic fluid. It uses aviation-grade phosphate ester fluid instead of conventional hydraulic oil. This fluid provides high fire resistance for applications where hydraulic leakage or line failure can create a fire hazard. The rated supply pressure is 21 MPa to 28 MPa, with an output force range of 20 kN to 200 kN and a stroke range of 50 mm to 300 mm.
The unit operates from -55°C to +125°C and is designed to maintain operation across a wide range of environmental conditions. It also supports air pressure from 10 kPa to 101 kPa for high-altitude applications. Position accuracy reaches ±0.02% of full stroke, while the dead zone is no more than 0.1% of rated current.

Tested for Aircraft Operating Conditions
The Electro Hydraulic Actuator Aircraft is tested according to SAE AS5440 and HB 5966-2008. Testing includes vibration, shock, temperature cycling, leakage, and position accuracy checks. The vibration test covers 10 Hz to 2000 Hz at 10 g acceleration, while the shock test is conducted at 30 g. The enclosure provides IP67 protection for resistance to dust and water ingress.
The hydraulic system is designed for a maximum internal leakage rate of 0.5 mL/min. The control power supply is 28 V DC, and the servo valve bias current is no more than 5 mA. Fatigue life is rated at least 10 million cycles, with a stated no-maintenance period of at least 5000 flight hours.
Production is carried out on a dedicated manufacturing line. Each steel material used for the actuator is supplied with an aviation material certificate covering material composition and mechanical properties. Dedicated tooling, cutting tools, and gauges are identified for this product line to prevent mixing with other production.
Assembly is performed in a temperature- and humidity-controlled room, with environmental data recorded hourly. After assembly, each unit undergoes temperature cycling from -55°C to +125°C and back. The cycle is repeated three times. Position accuracy and leakage are checked after each cycle, and the test results are reviewed before final release.

Specifications
|
Parameter |
Content |
|
Hydraulic fluid |
Aviation-grade phosphate ester fluid |
|
Rated supply pressure |
21 MPa to 28 MPa |
|
Output force range |
20 kN to 200 kN |
|
Stroke range |
50 mm to 300 mm |
|
Working temperature |
-55°C to +125°C |
|
Air pressure range |
10 kPa to 101 kPa |
|
Position accuracy |
±0.02% of full stroke |
|
Dead zone |
≤0.1% of rated current |
|
Vibration |
10–2000 Hz, 10 g acceleration |
|
Shock |
30 g |
|
Protection class |
IP67 |
|
Internal leak |
≤0.5 mL/min |
|
Control power |
28 V DC |
|
Servo valve bias current |
≤5 mA |
|
Fatigue life |
≥10 million cycles |
|
No-maintenance period |
≥5000 flight hours |
|
Standard |
SAE AS5440, HB 5966-2008 |
FAQ
Q: Can I use conventional hydraulic oil in this actuator?
A: No. The Electro Hydraulic Actuator Aircraft is specified for aviation-grade phosphate ester fluid. The fluid provides high fire resistance for aircraft hydraulic applications.
Q: What is the operating temperature range?
A: The actuator operates from -55°C to +125°C. The specified air pressure range is 10 kPa to 101 kPa, supporting operation across a wide range of altitude conditions.
Hot Tags: electro hydraulic actuator aircraft, China electro hydraulic actuator aircraft manufacturers, suppliers, factory, Compact Electro Hydraulic Actuator, Electro Hydraulic Linear Actuator, Electro Hydraulic Servo Actuator, Parallel Electro hydraulic Actuator, Self Contained Electro Hydraulic Actuator, Ultra large Electro hydraulic Actuator
Previous
Electro Hydraulic Servo ActuatorNext
No InformationYou Might Also Like
Send Inquiry














